FoamPRO Mfg F1000 Manual

A SERVICE OF

next previous

FOAMPRO® F1000

53

©2001 R11.01

SHUTDOWN

Note: It is not necessary to flush the hoses or empty them prior to storage.

1 | Complete the shutdown procedure detailed in Steps 1 through 7 above.

2 | Place a paper towel beneath the connection of the Hose Filter valve and the

Chemical Outlet valve on the “A” chemical cylinder.

3 | Disconnect the Hose Filter from the chemical cylinder.

4 | Replace the cap on the chemical outlet valve on the chemical cylinder, and

replace the plug in the end of the Hose Filter.

5 | Place a paper towel beneath the connection of the Hose Filter valve and the

Chemical Outlet valve on the “B” chemical cylinder.

6 | Disconnect the Hose Filter from the chemical cylinder.

7 | Replace the plug in the chemical outlet valve on the chemical cylinder, and

replace the cap on the end of the Hose Filter.

Diagram 53A