5 - PROCEDURES
90
190-00357-00 Rev C
Flying an Approach with a Hold
Starting where the previous example left off,
we’ll assume weather conditions resulted in a missed
approach at Lynchburg Regional. Now, you’ve decided
todiverttoFarmvilleRegional(KFVX)instead.
Farmville (VA) Regional
GPS Rwy 21
DO NOT USE FOR
NAVIGATION
1. Press direct-to.
2. Use the small and large right knobs to enter
the destination airport’s identifier (KFVX).
3. Press ENT twice.
This time, you select the GPS runway 21 approach
into Farmville Regional. The GPS runway 21 approach
beginswithaholdingpatternattheIAF,BODRY
intersection.
4. Press PROC and select the “GPS 21”
approach.
5. From the transitions window, select BODRY
intersection as the IAF, assuming that ATC has
cleared you direct to the BODRY intersection.
Also, select “Activate?” to load and activate
the approach.
Press PROC and select the “GPS 21” ap-
proach. Then, select BODRY intersection (the
IAF) from the transitions window.
6. Once you activate the approach, the Active
Flight Plan Page appears. You may review the
approach sequence by pressing the small right
knob and turning the large right knob. Press
FPL to return to the navigation pages.
Once you “Activate?” the approach, the
Active Flight Plan Page appears showing the
sequence of waypoints in the approach.
Approach with Hold
