Garmin 500W Series Manual

A SERVICE OF

next previous

9 - AUX PAGES

172

190-00357-00 Rev C

Utility Page

Software Versions — provides software version

information for the operating software within the GPS

receiver,COMtransceiver,VOR/localizerreceiver,

glideslope receiver and main processor board.

Database Versions —TheDatabaseVersionsPage

displays the current Jeppesen database type, effective

date, and expiration date, along with the version and

type of built-in land database.

Terrain Database Versions —TheTerrainData-

baseVersionsPagedisplaysthecurrentterrainand

obstacle database types, version, cycle, effective date,

and expiration date.

Checklists

To create a checklist:

1. Select “Checklist” from the Utility Page. Press

ENT to display a list of checklists.

Select “Create New Checklist?” to enter a new checklist into

memory. If the new checklist is similar to a checklist you’ve

already created, you may wish to use the “Copy Checklist?”

option and then edit the checklist copy.

2. Press MENU to display an options menu. Turn

the large right knob to select “Create New

Checklist?” and press ENT.

3. Use the small and large right knobs to enter

the name of a checklist. Press ENT when ﬁn-

ished. (Up to nine different checklists can be

created and stored in the 500W-series unit.)

4. Use the small and large right knobs to enter

each checklist item followed each time by ENT.

(Each checklist may contain up to 30 line items

up to sixteen characters in length.)

To execute a checklist:

1. With the Checklists Page displayed, turn the

large right knob to select the desired checklist

and press ENT.

2. As you complete each checklist item, press ENT

to move to the next item on the list.

To edit a checklist:

1. With the Checklists Page displayed, turn the

large right knob to select the desired checklist

and press ENT.

2. Press MENU to display an options menu.

Select “Edit Item?” and press ENT, then use

the small and large right knobs to edit each

checklist item. Press ENT when ﬁnished.

To insert a checklist step into an existing check-

list:

1. With the Checklists Page displayed, turn the

large right knob to select the desired checklist

and press ENT.

2. Turn the large right knobs to highlight the

existing checklist entry which immediately fol-

lows the new checklist step.

3. Turn the small and large right knobs to

enter the new checklist step. Press ENT when

ﬁnished.