Garmin 500W Series Manual

A SERVICE OF

next previous

2 - NAV PAGES

32

190-00357-00 Rev C

If no ﬂight plan or direct-to destination has been

selected only speed, track, altitude, fuel ﬂow and min-

imum safe altitude data may be displayed. All other

datatypesappearasblanklines—ontheDefaultNAV

Page — until a destination is selected.

To select a different data item for any data ﬁeld:

1. Starting with the Default NAV Page, press the

MENU key to display an options menu.

2. Turn the large right knob to highlight

“Change Fields?” and press ENT to select this

option.

3. Use the large right knob to highlight the data

ﬁeld you wish to change.

4. Turn the small right knob to display the list

of available data items. Continue turning the

small right knob to select the desired data

item from the list.

Once “Change Fields?” is selected, use the

large right knob to select the ﬁeld you wish

to change and the small right knob to select

the new data type.

5. Press ENT to select the desired data item and

return to the Default NAV Page.

6. Press the small right knob to remove the

cursor from the page.

Restoring Factory Settings

You can also quickly return all data ﬁeld settings to

their original factory settings.

The “Restore Defaults?” option returns all

data ﬁelds to their original factory settings.

To restore all four selectable data ﬁelds to factory

default settings:

1. Starting with the Default NAV Page, press the

MENU key to display an options menu.

2. Turn the large right knob to highlight the

“Restore Defaults?” option and press ENT.

Dual Unit Considerations

A“Crossll?”optionisprovidedfromtheDefault

NAVPage.Thisoptionallowsyoutotransferadirect-

to destination, the active ﬂight plan, any stored ﬂight

plan or user waypoints to a second 400W or 500W-

series Garmin unit.

Some crossﬁll operations can be done automati-

cally. If the crossﬁll method in both 500W (or 400W)-

series units is set to “auto”, a change in the direct-to

destination or active ﬂight plan on one unit can also be

seen on the other. See Section 4 - Flight Plans - Flight

Plan Catalog Options for additional details on using

the “Crossﬁll?” option.

NOTE: The databases of the 400/500 series and the

400W/500W are incompatible, so you may not mix

systems.

Default NAV Page