Filter
Top Products
140 Bluetooth
Connecting a Bluetooth headset or car kit
You can listen to music over an Bluetooth stereo headset, or have hands-free conversations
using a compatible Bluetooth headset or car kit. It’s the same procedure to set up stereo
audio and hands-free.
For you to listen to music with your headset or car kit, the headset or car kit must support
the A2DP Bluetooth profile.
Turn on the headset and put it in “pairing” mode. Refer to the instructions that came with the
headset to find out how.
1. Press HOME > MENU, and then tap Settings > Wireless & networks > Bluetooth settings.
2. If Bluetooth is not switched on, tap the Bluetooth check box to switch it on.
3. Tap Scan for devices. Your phone will start to scan for Bluetooth devices within range.
4. When you see the name of your headset displayed in the Bluetooth devices section, tap
the name. Your phone then automatically tries to pair with the headset.
5. If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit name
in the Bluetooth devices section. When the Bluetooth headset or car kit is connected to your
phone, the Bluetooth connected icon is displayed in the status bar. Depending on the
type of headset or car kit you have connected, you can then start using the headset or car kit
to listen to music and/or make and receive phone calls.
Reconnecting a headset or car kit
When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone, and then turning on the headset.
However, sometimes you will need to reconnect manually, for example if you have been using
your headset with another Bluetooth device.
Put the headset in pairing mode.
On your phone, press HOME > MENU, and then tap Settings > Wireless & networks >
Bluetooth settings.
If Bluetooth is not switched on, tap the Bluetooth check box to switch it on.
Tap the headset’s name in the Bluetooth devices section.
If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit
documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in “Unpairing
from a Bluetooth device” in this chapter, and then follow the instructions under “Connecting
a Bluetooth headset or car kit” above.
1.
2.
3.
4.
5.