Filter
Top Products
Basics 21
Removing the battery
Remove the back cover. Refer to “Removing the back cover.”
Lift the battery up from the groove at the top of the battery compartment.
Charging the battery
The battery is partially charged when shipped. Before you turn on and start using your
phone, it is recommended that you charge the battery. Some batteries perform best after
several full charge/discharge cycles.
Attach the power plug to the AC adapter.
Connect one end of the USB cable to the sync connector on your phone.
3. Connect the other end of the USB cable to the USB port of the AC adapter.
4. Plug in the AC adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED (located on the right side of the
earpiece) shows a solid red light when the battery is being charged. The light turns to solid
green when the phone is fully charged.
When you charge the battery while the phone is on, the charging battery icon ( ) is
displayed in the status bar of the Home screen. After the battery has been fully charged, a
full battery icon ( ) will be displayed in the status bar of the Home screen.
Only the AC adapter and USB sync cable provided with your phone must be used to charge the
battery.
Do not remove the battery from the phone while you are charging it using the AC or car adapter.
As a safety precaution, the battery stops charging when it overheats.
1.
2.
1.
2.