Alternative Client Installation Method
Upgrading the DiVitas Client
DiVitas Client User Guide for Nokia E and N Series Phones, v2.7
70
To determine which version is running on a handset, dial *#0000# from the native dialer,
(not from the DiVitas Client dialer.) If necessary, upgrade the firmware using the Nokia
Software Updater (at nokia.com/softwareupdate) and PC Suite.
Note: A factory reset is done during firmware upgrade, which will remove all your data.
Before upgrading the firmware, make sure to save all your contacts and other data
onto a PC or flash card. Also, make sure your phone battery is fully charged.
Alternative Client Installation Method
If the handset is not provisioned to receive email or SMS messages, you can use the
following steps instead. You will need to know the IP address or FQDN of the server. If
you are outside the network firewall, the firewall also might need to be configured to allow
your handset to reach the server. Ask your DiVitas Server administrator for the DiVitas
Server IP address or FQDN to use.
1 On the handset, open a web browser.
2 Navigate to the following URL:
https://<server-ipaddr-or-FQDN>/hs_img
where server-ipaddr-or-FQDN is an IP address or fully qualified domain name
provided by the system administrator.
3 If the browser is configured to prompt you to select a connection, select one to
continue.
A message appears, stating that the DiVitas Server has a certificate that is not trusted
by the handset.
4 Press the left selection key to select Options, then select Continue.
The User name dialog appears.
The DiVitas Server must be reachable on the connection you select.