Filter
Top Products
Copyright © 2003 Nokia. All rights reserved.
Settings
30
Automatic redial
• When this setting is activated, your phone will make a maximum of ten attempts to
connect the call after an unsuccessful call attempt. Press to stop automatic
redialling.
Summary after call
• Activate this setting if you want the phone to briefly display the duration and cost of
the last call. To show costs, the Call cost limit needs to be activated for your SIM card.
See p. 24
.
Speed dialling
• Select On and the numbers assigned to the speed dialling keys ( - ), can be
dialled by pressing and holding the key. See also ‘
Assigning speed dialling keys’, p. 49.
Anykey answer
• Select On, and you can answer an incoming call by briefly pressing any key, except
, , and .
Line in use (network service)
Voice message
indicators: , ,
or is shown if you
have one or several voice
messages.
• This setting is shown only if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making
calls and sending text messages. Calls on both lines can be answered irrespective of
the selected line.
Note: You will not be able to make calls if you select Line 2 and have not
subscribed to this network service.
Tip: To switch
between the phone lines,
press and hold in
standby mode.
To prevent line selection, select Line change→ Disable if supported by your SIM card. To
change this setting, you need the PIN2 code.