Filter
Top Products
Copyright © 2003 Nokia. All rights reserved.
Settings
34
• Use default settings to use the default settings. Make the needed changes and press
Back to save the settings.
• Use existing settings to use existing setting information as the basis for the new access
point settings. A list of existing access points is opened. Select one and press OK.
Access point settings are opened with some fields already filled.
Editing an access point
When you open Access points, the list of already available access points opens, see Fig.
3
, p. 34. Scroll to the access point you want to edit, and press .
Deleting an access point
In the list of access points, scroll to the access point you want to remove and select
Options→ Delete.
Access points
Options when editing
access point settings:
Change, Advanced settings,
Help, and Exit.
Here you can see a short explanation for every setting that may be needed for different
data connections and access points.
Note: Start to fill in the settings from the top because depending on what data
connection you select (Data bearer) or whether you need to insert a Gateway IP
address, only certain setting fields are available.
Note: Follow the instructions given to you by your service provider very carefully.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GSM data, High speed GSM, and GPRS. Depending on what
data connection you select, only certain setting fields are available. Fill in all fields
marked with Must be defined or with a red asterisk. Other fields can be left empty,
unless you have been instructed otherwise by your service provider.
Fig. 3 A list of access
points using different
data connections.