2. Your phone
Standby mode
When the phone is ready for use, and you have not keyed in any characters, the phone is in standby mode.
1—Shows the name of the network or the operator logo to indicate the cellular network in which the phone is currently
being used.
2—Shows the signal strength of the cellular network at your current location. The higher the bar, the stronger the signal.
3—Shows the battery charge level. The higher the bar, the more power in the battery.
4—The left selection key
in standby mode is Go to. You can use the key as a shortcut to your favorite functions.
To view the list of functions that you have on your personal shortcut list, press Go to. To activate a function, scroll to it, and
press Select.
To add more functions to the shortcut list, press Options, select Select options, and the list of available functions is shown.
Scroll to a function, and press Mark to add it to the shortcut list. To remove a function from the list, press Unmark.
To arrange the functions on the shortcut list, press Options, and select Organise. Scroll to the function that you want to
move, press Move, and select where you want to move the function.
If there are no functions in the shortcut list, press Add to add a function.
5—The middle selection key
in standby mode is Menu.
6—The right selection key
in standby mode may be Names to access the Contacts menu, an operator-specific key to
access an operator’s homepage, or a specific function that you have selected in the Right selection key menu.
See Personal
shortcuts on page 38.
Wallpaper and screen savers
• You can set your phone to display a background picture, wallpaper, when the phone is in standby mode.
• The phone automatically activates the digital clock screen saver on the display in standby mode after a certain length of
time if no phone function is used. Note that if you have not set the time, 00:00 is displayed.
Some useful shortcuts in standby mode
• To access the list of dialed numbers, press . Scroll to the number or name that you want, and press to call the
number.
• To call your voice mailbox, press and hold
.
• To make a connection to a browser service, press and hold
.
• To open the push to talk Group list, press
.
• To find a contact name, press
.
• To start writing a text message, press
.
• To open the camera viewfinder in standard photo view, press
. To quickly change the camera mode, for example
video, press and hold
or .
Keypad lock (Keyguard)
The keyguard disables your keypad to prevent accidental key presses.
When the keypad lock is on, calls still may be possible to the official emergency number programmed into your device. Key in
the emergency number and press
.
• To lock the keypad in standby mode, press Menu and
within 1.5 seconds.
• To unlock the keypad, press Unlock and
within 1.5 seconds.
• To answer a call when the keyguard is on, press
. During a call, the phone can be operated normally. When you end or
reject a call, the keypad automatically locks again. You can set whether the keyguard locks automatically or requires a
code to unlock.
Copyright © 2004 Nokia. All Rights Reserved. 13