Filter
Top Products
• Navigation key right, Navigation key left, Navigat.
key down, Navigation key up, Selection
key — Change the shortcuts that open when you
scroll to different directions. These settings are not
available if you select Active standby > On.
Display settings
Select Display and from the following:
• Light sensor — Adjust the amount of light required
to illuminate the device display.
• Power saver time-out — Select the amount of time
before the screen saver is activated. Activating the
screen saver lengthens the device operating time.
• Light time-out — Set how quickly after last keypress
the display dims.
Call settings
Select Call and from the following:
• Send my caller ID — Select Yes to display your phone
number to the person you are calling or Set by
network to let the network to determine whether
your caller ID is sent.
• Send my net call ID — Set this feature on if you want
to display your net caller ID to the person you are
calling.
• Call waiting — Select Activate to be notified of a new
incoming call while you have a call in progress or
Check status to check if the function is active on the
network.
• Internet call waiting — Activate this feature to be
notified of a new incoming call while you have a net
call in progress.
• Internet call alert — Set this on if you want the device
to respond to the caller that it is busy. If you set this
off, the device emits a busy tone to the caller and you
receive a notification about the missed call.
• Default call type — Select Cellular to make normal
calls to the phone number or Internet to use VoIP to
call the number or address.
• Reject call with SMS — Select Yes to send a text
message automatically to the person who is calling
you informing why you cannot answer their
incoming call.
• Message text — Enter the text that is sent when you
cannot answer an incoming call and want to
automatically send a text message as a reply.
• Image in video call — Select Use selected to select a
still image to be displayed instead of a video during
a video call or None to not send any image during a
video call.
• Automatic redial — Select On to redial a number if it
was busy at the first call attempt. Your device makes
a maximum of 10 attempts to connect the call.
• Summary after call — Select On to briefly display the
approximate duration of the last call.
• Speed dialling — Select On to activate speed dialing
on your device. To dial a phone number assigned to
the speed dialing keys (2-9), press and hold the key.
See "Speed dial," p. 26.
• Anykey answer — Select On to answer an incoming
call by briefly pressing any key, except the end key.
• Line in use — Select Line 1 or Line 2 to change the
phone line for outgoing calls and text messages
87
Settings
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/grawei/29555801/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 87 May 22, 2006 5:43:34 AM
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/grawei/29555801/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 87 May 22, 2006 5:43:34 AM