Filter
Top Products
• Radio measurements — Enable or disable the radio
measurements.
To restore all settings to their original values, select
Options > Restore defaults.
Security settings for wireless LAN access
points
WEP security settings
Select Menu > Tools > Settings > Connection > Access
points. Select Options > New access point, or select an
access point and Options > Edit.
In the access point settings, select WLAN security
mode > WEP.
Wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When WEP security mode is in use,
if your device receives a data packet not encrypted with
the WEP keys, the data is discarded.
In an Ad-hoc network, all devices must use the same
WEP key.
Select from the following:
• WEP key in use — Select the desired WEP key.
• Authentication type — Select Open or Shared.
• WEP key settings — Edit the settings for the WEP key.
WEP key settings
Select Menu > Tools > Settings > Connection > Access
points. Select Options > New access point, or select an
access point and Options > Edit.
In the access point settings, select WLAN security
mode > WEP.
In an Ad-hoc network, all devices must use the same
WEP key.
Select WLAN security sett. > WEP key settings and from
the following:
• WEP encryption — Select the desired WEP encryption
key length.
• WEP key format — Select whether you want to enter
the WEP key data in ASCII or Hexadecimal format.
• WEP key — Enter the WEP key data.
802.1x security settings
Select Menu > Tools > Settings > Connection > Access
points. Select Options > New access point, or select an
access point and Options > Edit.
In the access point settings, select WLAN security
mode > 802.1x.
802.1x authenticates and authorizes devices to access
a wireless network, and prevents access if the
authorization process fails.
Select WLAN security sett.. and from the following:
• WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
• EAP plug-in settings — If you selected WPA mode >
EAP, select which EAP plug-ins defined in your device
to use with the access point.
• Pre-shared key — If you selected WPA mode > Pre-
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
91
Settings
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/grawei/29555801/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 91 May 22, 2006 5:43:34 AM
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:///C:/USERS/MODEServer/grawei/29555801/rm-10_zeus/en/issue_2/rm-10_zeus_en_2.xml Page 91 May 22, 2006 5:43:34 AM