Filter
Top Products
USING EMAIL AND OTHER WIRELESS SERVICES
BEAMING A RECORD
70
4
CHAPTER
7 Enter an alphanumeric passkey
between 1 and 16 characters long, and
then press Next (right action key).
IMPORTANT Some Bluetooth devices
have a built-in passkey; others let you
choose the passkey. See the
documentation for the Bluetooth device for
more info.
8 If the passkey is not built-in, enter the
same passkey on the smartphone and
the other Bluetooth device, and then
press Finish (right action key).
9 If you’re connecting to a headset or
hands-free car kit, check the Hands
Free box, and then press Finish
(right action key).
10 If you’re connecting to a GPS device,
press Finish (right action key),
select the COM Ports tab, select the
GPS device you selected in step 6, and
then select New Outgoing Port. Press
Finish (right action key). After you
set the partnership and COM port, you
can configure the GPS settings (see the
Using Your Palm
®
Treo™ 700wx user
guide for more information). Be sure to
select the same port you have assigned
for GPS here.
11 Press OK .
You can now communicate with this device
whenever it is within range (about 30 feet)
and your smartphone’s Bluetooth feature is
turned on (see steps 2 and 3 earlier in this
section).
Beaming a record
Your smartphone is equipped with an IR
(infrared) port that lets you beam
information to another device with an IR
port. The IR port is located on the top of
DID
YOU
KNOW
?
If you’re using a hands-free
Bluetooth device and it is within range, your
smartphone routes all calls to the hands-free
device instead of to your smartphone’s
earpiece. Bluetooth range is up to 30 feet in
optimum environmental conditions.
TIP
Your smartphone supports only call audio
with Bluetooth headsets. It does not support
stereo music playback with Bluetooth
headsets (enabled with Bluetooth A2DP
profile).