Filter
Top Products
Section 2: Understanding Your Phone
2Q: HotSync Operations 161
Note: The HotSync Manager is now communicating with the simulated
port defined for infrared communication. This means that you cannot use
your cradle again until you reconfigure the HotSync Manager to
communicate with the port defined for cradle synchronization.
Performing an IR HotSync
®
Operation
After you complete the steps to prepare for performing an IR HotSync
operation, it is easy to perform the actual operation.
To perform an IR HotSync operation:
1.
Tap the Applications Launcher icon .
2. Tap the HotSync icon .
3. Tap Local.
4. Tap the drop down menu below the HotSync icon and select IR to a
PC/Handheld.
5. Position the IR port of your handheld within a couple of inches of
the infrared port of your computer.
6. Tap the HotSync icon to start the IR HotSync operation.
Returning to cradle HotSync operations
1.
If needed, connect the cradle to a serial (COM) port of your
computer.
2. Click the HotSync Manager icon in the Windows system tray.
3. Choose Setup, and then click Local.
4. Select the COM port where your cradle is connected.
5. Click OK.