Filter
Top Products
12 2A. Phone Basics
2.
Insert the battery into the opening, making sure to line up
the gold contacts (3). Gently press down to secure the
battery (4).
3. Replace the cover by lining up the tabs and then firmly
sliding the cover away from the lens until it snaps into place.
Removing the Battery
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. In a single motion, press down on the cover and slide it
towards the lens, then remove the battery from the phone
(1 and 2).
Charging the Battery
Keeping track of your battery’s charge is important. If your battery
level becomes too low, your phone automatically turns off, and
you will lose any information you were just working on.
Always use a Samsung-approved desktop charger, travel charger,
or vehicle power adapter to charge your battery.
ᮣ Plug the flat end of the charger into the phone’s charger/
accessories jack and the other end into an electrical outlet.
ᮣ The area above the external LED then illuminates based on a
charge status:
Ⅲ A red indicator light means the battery is charging.
Ⅲ A green indicator light means the battery is at least 90
percent charged.
WARNING
Do not handle a damaged or leaking Li-Ion battery
as you can be burned.
Tip
It is recommended that you completely charge your battery
first before using your phone. This guarantees you begin
using your phone with a fully charged battery.
PLS-M240.book Page 12 Wednesday, September 23, 2009 3:55 PM