Filter
Top Products
42 2B. Settings
Resetting Your Phone
Resetting the phone restores all the factory defaults, including the
ringer types and display settings.
1. Press > Settings > More... > Security and enter your
lock code.
2. Select Erase/Reset > Reset Phone. (You will see a
disclaimer.)
3. Read the disclaimer, press OK (left softkey), and then
press
Yes.
4. If you are then sure you want all data erased and the phone
reset to its factory default state, then press
Yes.
Security Features for Data Services
Enabling and Disabling Data Services
You can disable data services without turning off your phone;
however, you will not have access to all data services, including
Web and messaging. Disabling data services will avoid any
charges associated with these services. While signed out, you
can still place or receive phone calls, check voicemail, and use
other voice services. You may enable data services again at any
time.
To disable data services:
1. Press > Settings > More... > Data > On/Off.
2. Read the onscreen message and select NEXT (left softkey) >
Disable Data to confirm that you want to sign out and
deactivate data.
To enable data services:
1. Press > Settings > More... > Data > On/Off.
2. Select either Connect or Always Auto-connect > Yes to
enable data service and connect to the network.
WARNING
Resetting your phone deletes all files that you have
previously downloaded.
PLS-M240.book Page 42 Wednesday, September 23, 2009 3:55 PM