Filter
Top Products
22 2A. Phone Basics
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial
memory. Dial speed dial entries using one keypress for locations
2–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ Press and hold the appropriate key for approximately two
seconds. The display confirms that you have dialed the
number when it shows “Connecting...”
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately two
seconds. The display confirms that you have dialed the
number when it shows “Connecting...”.
Entering Text
Your phone provides convenient ways to enter letters, numbers,
emoticons, and symbols whenever you are prompted to enter text
(for example, when adding a Contacts entry or when using email
and text messaging).
In this section we’ll cover the steps necessary to enter text while
the phone is in portrait mode where the keypad is the primary
method of both text and character entry.
Selecting a Text Input Mode
1. From a screen where you can enter text, press Options (right
softkey)
> Text Mode to change the text input mode.
2. Select one of the following text mode options:
Ⅲ T9(English) to enter text using a predictive text system that
reduces the number of keypresses required while entering
a word. (see page 23.)
Ⅲ Alpha to cycle through the alpha characters associated
with the letters on the keypad. (see page 24.)
Ⅲ Symbols to enter symbols. (see page 25.)
Ⅲ Number to enter numbers by pressing the numbers on the
keypad. (see page 25.)
Note
Speed dialing is not available when you are roaming; when
you are roaming off the home network, you must always
dial using eleven digits (1 + area code + number).
PLS-M240.book Page 22 Wednesday, September 23, 2009 3:55 PM