Filter
Top Products
Web and Data
3B. Web and Data Services 79
Net Guard
When you first connect to the Web, the Net Guard will be
displayed to confirm that you want to connect. This feature helps
you avoid accidental connections. You can disable the Net Guard
in the future by selecting
Always Auto-Connect when the Net
Guard is displayed.
To change your Net Guard settings:
ᮣ Press > Settings > More... > Data > Net Guard.
Ⅲ Select On to activate the Net Guard.
Ⅲ Select Off to deactivate the Net Guard.
Data Connection Status and Indicators
Your phone displays the current status of your data connection
through indicators at the top of the screen. The following symbols
are used:
Your data connection is active (data is being transferred);
the transmit/receive symbol will blink to indicate data
transmission. During data usage, you can not receive
incoming voice calls or text messages; outgoing voice
calls can be made, but the data services connection will
terminate.
Your data connection is dormant (no data is being sent
or received). Though not currently active, when
dormant the phone can restart an active connection
quickly; voice calls can be made and received.
If no indicator is displayed, your phone does not have a current
data connection. To launch a connection, see “Launching a Web
Connection” on page 78.
Tip
To change the default launch page to the last page you
viewed, press
Menu (right softkey) > Mark this page and
select the
Set this as my homepage, select Save and
press
OK.
Note
When enabled, the Net Guard appears only once as long as
you have not turned the phone off and on.
PLS-M240.book Page 79 Wednesday, September 23, 2009 3:55 PM