Filter
Top Products
50 2D. Contacts
Finding Speed Dial Numbers
1. Press > Contacts > Options (right softkey) > Settings >
Speed Numbers.
2. Scroll through speed dial entries. Speed dial numbers are
displayed in numeric order.
– or –
Enter the number of a speed dial location using your keypad.
3. To display an entry, highlight it and press .
4. To dial the entry’s default phone number, press .
Adding a New Group
Groups allow you to communicate simultaneously by sending out
a broadcast text message to every member of a current group.
1. Press > Contacts.
2. Press Options (right softkey) > New Group to create a new
Group category.
3. Read the onscreen information and press Start (left softkey).
4. Add multiple entries (two or more) to your new group by
highlighting a name from the list and pressing . This
action places a check mark alongside the name.
5. Press Continue (left softkey) and enter a name for the new
group. (See “Entering Text” on page 22.)
6. Press Save (left softkey) to assign the selected entries to the
new group.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can identify the
caller by the ringer type. (See “Ringer Types” on page 28.)
1. Display a Contacts entry and press Options (right softkey) >
Edit Contact.
2. Highlight the current ring type and press to display the
Select Ringer menu.
3. Select a ringer type, such as Default Ringer, Downloaded
Ringers, Other Ringers, or No Ringer.
Note
Speed Dial location 1 is reserved for voicemail access.
Note
If several numbers are saved within a single Contacts entry,
you can select from these additional numbers by using the
left or right navigation keys.
PLS-M240.book Page 50 Wednesday, September 23, 2009 3:55 PM