Filter
Top Products
R290 User’s Guide
13
is complete and a network will be displayed for selection. An example of
the display for GSM mode will be:
If there is more than one network, up/down arrow symbols will appear at
the bottom of the screen and the SOFT KEYS can be used to view them.
When the desired network is displayed, press YES to select it. The phone
will then register with the network.
The stand-by display
Once a network has been selected, the stand-by display will appear. This
contains the signal strength indicator, the battery level indicator, and the
network details (i.e. the country code and network code for the selected
network). If the country and network codes are recognised by the phone,
they are converted to names to help you identify the network. An example
of the stand-by display is shown:
You may now make a call, answer a call, or access any of the advanced
features available with the phone.
If normal calls cannot be supported, or registration fails, or if roaming
occurs when there is no roaming agreement, emergency calls may be
made (if allowed), but the network name will not be shown on the top of
the screen. The network name will also be removed if the network
connection is lost, whereby the message ‘No Service’ will be displayed.