Filter
Top Products
R290 User’s Guide
33
Automatic Display of Call Time
To access the Auto Time menu.
1. Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2. Press 6 to show Auto Time menu.
3. To enable Auto Time, press 1 or YES. To disable it, press 2.
A confirmation message will be displayed before the phone returns to the
‘Call Setup’ menu.
Auto Answer
Allows you to enable or disable the handsfree auto-answering function.
When enabled, the phone will automatically answer an incoming call
when the phone is attached to the handsfree car kit.
To access the Auto Answer menu.
1. Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2. Press 7 to show Auto Answer menu.
3. To enable Auto Time, press 1 or YES. To disable it, press 2.
A confirmation message will be displayed before the phone returns to the
Call Setup menu.
Greetings
A greetings text appears after you enter your PIN when you first turn on
the phone. You can change the text as follows:
1. Press SOFT LEFT, 1, 3 to enter Greetings Menu.
2. Press CLR to clear message.
3. Press YES to confirm.
4. Enter the first letter of the greeting (up to four lines) by pressing the
appropriate numeric key as many times as required. To change the
character set to lower case press the SOFT RIGHT key, see Table
“Lower Case Mode” on page 22.
NOTE:
Pressing the SOFT RIGHT key will cycle the character sets through
Upper case, Lower case, Numeric, Greek and back to Upper case. The
current mode is shown in the bottom right corner of the screen with the
characters ‘ABC’ corresponding to Upper Case, ‘abc’ for Lower Case,
etc.
For example, to enter the text: ‘World’, press the following keys: W (9),
SOFT RIGHT, o (6666), r (777), l (555), d (3). The display will show:
Press YES to confirm. A confirmation message ‘Request Accepted’ will
be displayed before the phone returns to the Call Setup menu.
Clock
The clock can be set for 12 or 24 hr mode and various date modes.