Filter
Top Products
R290 User’s Guide
35
2. Press 4 to set Date Mode, current mode is shown with asterix.
3. The current date is presented in the currently selected date mode.
Press SOFT LEFT and SOFT RIGHT to toggle round the options.
The possible options are:
Day-Month–Year e.g. 19-05-99
Month/Day/Year e.g. 05/19/99
YearMonthDay e.g. 990519
Day-Month-Year e.g. 19-May-99
Off
4. Press YES to select an option.
The current date is displayed in the appropriate confirmation mode for 4
seconds before returning to the Clock menu.
Satellite Synchronisation Mode
1. Press SOFT LEFT, 1, 4 to enter the Clock menu.
2. Press 5 to set Satellite Synchronisation Mode.
3. The following display will appear:
4. Press SOFT LEFT or SOFT RIGHT to change displayed offset, the
time increments in 15 minutes steps to a maximum of 13 hours.
When required figure is seen press YES.
A confirmation message ‘Clock Synchronised’ will be displayed.
Language
The phone supports 12 languages for all display messages. The user has
the option to select any one of these languages as desired.
When the phone is first used following factory initialisation, language
selection is set to automatic. Consequently, the language will be selected
automatically according to the SIM.
Language Mode
To access the Language Mode menu.
1. Press SOFT LEFT, then 1 to enter Setup menu.
2. Press 5 to show Language menu.
3. To enable Automatic Language Selection, press 1 or YES. To enable
manual selection, press 2.
A confirmation message will be displayed before the phone returns to the
Call Setup menu.
To Choose a Language
1. Press SOFT LEFT, then 1 to enter Setup menu.
2. Press 5 to show Language menu.
3. Press 2 to choose a new language manually.
4. Press SOFT LEFT or SOFT RIGHT to scroll through the available
languages. Pressing and holding the keys for at least ½ second will
automatically scroll through the available languages, pausing for ½
second on each.