Filter
Top Products
R290 User’s Guide
39
1. Press SOFT LEFT, 7. The display will show:
While the keypad lock is on, emergency calls can be made by pressing 1,
1, 2.
If an incoming call is received, the backlight operation will be enabled
and the YES, NO and 0 keys will become operational. You can answer
the call using YES or reject it using NO, or 0 and YES for User
Determined User Busy (which allows the diversion of an incoming call to
be forced to the number that has been registered with the network for call
forwarding if busy).
NOTE:
The keypad lock takes precedence over Short Messages. Therefore, you
will need to disable the Key Lock first before you can read any of the
messages.
To unlock the keypad
When the keypad lock is enabled, pressing SOFT LEFT will only allow
the user to select the option to Unlock the keypad. The display will show:
Press 7 or YES to unlock the keypad.
Phone Lock (PIN)
The phone lock protects the phone against unauthorized use of the phone
if there is a theft. The phone lock is not activated when you buy the phone.
Upon purchase the phone Personal Identification Number (PIN) will be
set to 0000.
If the phone PIN is enabled, when you switch on the phone, the message
‘Phone PIN Enabled’ will be displayed. It is strongly recommended that
you enable the Phone PIN. If you do not like the original number we
recommend that you change it to one you find easy to remember.
It is important that you remember the phone PIN. Please make a note of
it somewhere safe, not on the SIM or the phone.
The phone PIN can only be changed when the MASTER SIM is inserted,
(the SIM fitted when the phone PIN was first enabled). If a different SIM
is used, the message ‘Request Rejected’ will be given.
To Enable the Phone PIN
1. Press SOFT LEFT, 1 to enter Setup menu.
2. Press 2 for Security menu, then press 1.