Filter
Top Products
R290 User’s Guide
31
NOTE:
If the network indicates to the phone that CCBS is possible then the
following screen will appear. If the number matches a number stored in
the phonebook then the name is displayed on line 2.
Press YES to make a CCBS request for this call. There is usually a delay
while the network responds so the phone will display ‘Please Wait’: The
network may respond with a confirmation that the request has been made
successfully or that the request has been rejected.
Press NO to return to stand-by without making a CCBS request.
If you do not press a key for 15 seconds then the display returns to stand-
by without making a CCBS request. You can make up to 5 CCBS
requests (this is network dependent).
To Complete a CCBS Call
When the phone receives a CCBS recall the number is displayed on
screen similar to below. If the user was in a menu then the menu is exited.
Press YES to complete the CCBS call.
Press NO to return to stand-by and cancel the CCBS request.
If you do not press a key for 15 seconds then the display returns to stand-
by and cancels the CCBS request.
Ring Tone
To access the Ring Tone menu.
1. Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2. Press 2 to show Ring Tone menu.
3. Press 1 for Ring Type.
4. Select required function:
• To enable Standard Tone, press 1.
• To enable Dual Tone, press 2.
• To enable Long Tone, press 3.
The phone will then return to the Call Setup menu.
Ring Volume
To access the Ring Volume menu.
1. Press SOFT LEFT, 1, 1 to enter Call Setup menu.
2. Press 2 to show Ring Tone menu.