Filter
Top Products
R290 User’s Guide
44
accompanied by the RADIO PATH ACKNOWLEDGEMENT TONE in
the earpiece.
The phone will then return to the stand-by display. It is possible to have
more than one call diversion option set at any one time, i.e. each option
can be set and cancelled individually (including Divert All Calls).
Notification that a Call has been Diverted
The network may inform the relevant parties when a call has been
diverted and the RADIO PATH ACKNOWLEDGEMENT TONE will be
played.
If the incoming call information includes a Calling Line Identification
Presentation (CLIP) number, this will be displayed before the notification
that a call has been diverted.
A notification message may also be sent if call diversion is active when
an outgoing call is made. The display will show:
To Remove Call Diversion
1. Press SOFT LEFT, 5 to enter Advanced menu.
2. Press 1 for Divert menu.
3. Press 3 for Cancel.
4. Press 1 or YES to cancel divert all calls, 2 to cancel divert a call
when the phone is engaged, 3 to cancel divert incoming calls if you
are not available, 4 to cancel divert incoming calls when the phone is
switched off.
5. Select the basic service group for which the call diversion is to be
cancelled. The display will show:
6. Press 1 for All Calls, 2 for Voice Only, 3 for Data Only or 4 for Fax
Only.
7. The display will show the message ‘Please Wait’ and then ‘Request
Accepted’ will be displayed. The RADIO ACKNOWLEDGEMENT
TONE will be played through the earpiece. The phone will then
return to the stand-by display.
Call Waiting
Call Wait is a network subscription option which allows an incoming call
to be held waiting when you are already in a call. If this option is not
available or not activated, new calls trying to reach you when you are
busy will be rejected and there will be no notification that you were being
called.
Call Hold is a network subscription option that allows a call to be placed
on hold when accepting a waiting call, or to start a new outgoing call. If
the network allows, the party being placed on hold may be sent
notification that their call is being put on hold. The notifications may be
an audible announcement and the message On hold will be displayed on
the screen. The calling party may also be sent notification when the call
becomes active again.
You can retrieve a call from hold if the active call has ended or the active
and held calls are switched.