Memory card may already be inserted in your device.
Memory cards are also available as separate
enhancements.
1. With the back of the device facing you, press the
release buttons (1) and slide the back cover off (2).
2. Insert the memory card in the slot with the contact
area first. Make sure that the contact area is facing
the connectors on the device.
3. Push the card in until it locks into place.
4. Close the back cover.
Eject the memory card
Important: Do not remove the memory card in
the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
1. Press the power key briefly, and select Remove
memory card.
2. Press the release buttons and slide off the back
cover.
3. Press the end of the memory card to release it from
the memory card slot.
4. Close the back cover.
Connect the headset
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset
connector of your device.
Set up your device
20
Set up your device
