Filter
Top Products
Make calls
107
Video sharing requirements
Because Video sharing requires a UMTS connection, your
ability to use Video sharing depends on the UMTS network
availability. Contact your service provider for more
information on the service and network availability, and
fees associated with using this service.
To use Video sharing you must do the following:
• Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p. 107.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 107.
If you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. You cannot start Video sharing if
you are not within UMTS network coverage.
• Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient’s device is not
within UMTS network coverage, or does not have Video
sharing installed or person-to-person connections set
up, the recipient does not know that you are sending an
invitation. You receive an error message that the
recipient cannot accept the invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing.
Ask your service provider for the SIP profile settings, and
save them in your device.
Your service provider may send you the settings over the
air or give you a list of the needed parameters.
If you know a recipient’s SIP address, you can enter it on
the person’s contact card. Press , select Contacts, and
open the contact card (or start a new card for that person).
Select Options > Add detail > SIP or Share view. Enter the
SIP address in the format username@domainname (you
can use an IP address instead of a domain name).
If you do not know a SIP address for the contact, you can
also use the phone number of the recipient including the
country code, for example +358, to share video (if
supported by the network service provider).
UMTS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.