Filter
Top Products
Setting Up Service
1A. Setting Up Service 5
2. From the align screen, use your stylus to calibrate
the touch accuracy of the screen by both
accurately and firmly tapping the center of each
target (crosshair). Repeat this process for every
target that appears until completed.
3. Review the onscreen tutorial screens by touching
Next to continue onto the next page.
– or –
Touch
Skip to move onto the password setup
portion of your initial setup where you can create a
password which must be used to access your
device’s features and data.
4. Touch Next to continue with the password setup.
– or –
Touch
Skip to set up a password at a later time and
continue onto step 10.
5. Touch the Prompt if device unused for checkbox to
enable the feature. (Enabling this option activates
the remaining fields.)
6. Select each field and enter the desired information:
Ⅲ Minutes: to select the amount of unused time (idle)
required before you are prompted for a password.
Ⅲ Password type: to choose from one of the following
PIN types:
● Simple PIN: must be at least four characters in
length and cannot contain a simple sequence
such as 0000, 1111, or 1234.
● Strong alphanumeric: must be at least seven
characters in length and must contain at least
one character from each of the following
categories: uppercase/lowercase letters,
numerals, and symbols. Examples of strong
alphanumeric passwords are
sb?8A!3 and
%$VH5hW.
Stylus
I350.book Page 5 Tuesday, September 29, 2009 3:24 PM