Filter
Top Products
Device Basics
2A. Device Basics 27
Ⅲ Open Call: (once highlighted) displays the time of
the last call and options such as
Call and Send text
message.
Ⅲ Save to Contacts: Enter a seven-digit or ten-digit
number (phone number and area code) and
begin the process of saving the information as a
new entry. See “Adding a New Contacts Entry” on
page 66.
Ⅲ Send Text Message: Send a text message to the
currently entered (or selected) number.
Ⅲ Company Directory: Displays your current company
phone numbers, contacts, and email information
(Microsoft Exchange accounts only).
Ⅲ Paste: Insert copied text or data.
Ⅲ Speed Dial: Assign the current number to an
available Speed Dial location (2–99). See
“Assigning Speed Dial Numbers” on page 70.
Ⅲ Options...: Provides access to the device’s Settings
page.
Ⅲ View: Provides a filter of the onscreen display by
showing entries based on three criteria:
Calls and
Contacts, All Calls, or Speed Dial.
X
Answering Calls
ᮣ Press to
answer an
incoming call.
– or –
Press
Answer
(left softkey).
(Depending on
your settings,
your device can
Note
Speed Dial location #1 is reserved for your voicemail.
Tip
To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 70.) (This feature will
not work when you are roaming off the Nationwide
Sprint Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number].)
I350.book Page 27 Tuesday, September 29, 2009 3:24 PM