Filter
Top Products
101
LZT 123 7263 R1C
3. Control and Status
3.1 ATQ Result Code Suppression
Determines whether or not the DCE transmits result codes to the DTE.
When result codes are being suppressed, no portion of any intermediate,
final, or unsolicited result code - header, result text, line terminator, or
trailer - is transmitted.
3.2 ATS0 Automatic Answer Control
Defines the automatic answering feature of the modem. A non-zero
value specifies the number of rings before the call is answered.
Note! Call is always answered in the current fax class, regardless of whether
the incoming call is voice, data, or fax.
Description Command Possible Responses
Set Result Code
Suppression
ATQ[=]<value> •OK
•ERROR
Show the current
setting
ATQ? Q: <value>
Show if the command
is supported
ATQ=? Q: (list of supported
<value>s)
<value> Description
0 DCE transmits result codes. Default value
1 Result codes are suppressed and not transmitted
Description Command Possible Responses
Automatic answer
control
ATS0=[<rcnt>] •OK
•ERROR
Show the current
setting
ATS0? <rcnt>
Show if the command
is supported
ATS0=? S0: (list of supported
<rcnt>s)
<rcnt> Description
0 Disable automatic answer. Default value
1-7 Answer after the specified number of rings