Filter
Top Products
18. SUPPLEMENTARY SERVICES
327
LZT 123 7263 R1C
When the MS is turned off and then turned on again the parameter
setting <n> shall turn back to default, i.e. the presentation of CLI shall
be used according to the subscription of the CLIR service, <n> is 0.
Read command gives the default adjustment for all outgoing calls
(given in <n>), and also triggers an interrogation of the provision status
of the CLIR service (given in <m>).
Test command returns values supported by the TA as a compound
value.
Note! On a per call base CLIR functionality is explained in subclause “ITU-T
V.25ter dial command”.
<n> Description
0 Presentation indicator is used according to the
subscription of the CLIR service
1 CLIR invocation
2 CLIR suppression
<m> Description
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed