Sony Ericsson GM48 Cell Phone User Manual


 
13. NETWORK
227
LZT 123 7263 R1C
When enabled (and allowed by the called subscriber), +COLP:
<number>,<type>[,<subaddr>,<satype> [,<alpha>]] intermediate
result code is returned from the TA to the TE before any +CR or V.25ter
responses. It is manufacturer specific if this response is used when
normal voice call is established.
Read command gives the status of <n>, and also triggers an
interrogation of the provision status of the COLP service according
3GPP TS 22.081 (given in <m>).
Test command returns values supported by the TA as a compound
value.
Intermediate Result codes:
+COLP: <number>,<type>[,<subaddr>,<satype> [,<alpha>]]
<n> Description
0 Disable
1 Enable
<m> Description
0 COLP not provisioned
1 COLP provisioned
2 unknown (e.g. no network, etc.)