Filter
Top Products
2. SYSTEM INITIALIZATION
2-30
2.8 Entering Own Ship’s Position
When the internal GPS navigator is abnormal, manually enter position as below.
1. Press the [F9] key to display the Position menu.
Ship Position
34:30.00N
135:30.00E
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
LAT
LON
Ship position window
2. Press the [Enter] key to open the latitude entry window.
00:00.00N
000:00.00E
Ship Position
LAT
LON
34:30.00N
Latitude entry window
3. Enter latitude (XX° XX) and then press the [N] or [S] key as appropriate to
enter coordinate.
4. Press the [Enter] key to close the window.
5. Press the [↓] key to choose LON.
6. Press the [Enter] key to open the longitude entry window.
00:00.00N
000:00.00E
Ship Position
135:30.00E
LAT
LON
Longitude entry window
7. Enter longitude (XXX° XX) and then press the [E] or [W] key as appropriate
to enter coordinate.
8. Press the [Enter] key to close the window.
9. Press the [Esc] key to open the update window.
Ship Position
LAT
LON
34:50.00N
000:00.00E
Update
No
Yes
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Ship position, update
10. Yes is selected; press the [Enter] key to update position and close the Ship
Position menu. The position entered appears at the bottom right corner of the
system status monitor screen.