Filter
Top Products
156 Getting Connected
To save battery power while connected to a wireless network
Using Wi-Fi consumes battery power fast. Turn off Wi-Fi when not in use. You
can also enable power saving settings.
1. Tap Start > Settings > Connections
tab > Wireless LAN.
2. On the Power Mode tab, move the
Power Save Mode slider to a position
that optimizes performance with the
least power consumption.
For example, move the slider to
the left (Best Performance) to
have the optimal wireless network
performance; move to the right (Best
Battery) to obtain the maximum
battery usage.
10.4 GPRS
Use GPRS to connect to the Internet and to send and receive picture
messages on your device. You will be billed per KB (Kilobyte) when you use
GPRS. Check with your wireless service provider to find out about
GPRS rates.
GPRS settings are already preconfigured on your device, and your device is
ready to use your wireless service provider’s GPRS services. Please do not
change the settings as this may cause services to stop working.
To add a new GPRS connection
In times when you need to add another GPRS connection on your device,
obtain the Access point name from your wireless service provider. Also,
check if a user name and password are required.
1. Tap Start > Settings > Connections tab > Connections.
2. Under MEdia Net, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
connection.