Filter
Top Products
Repeat the voice tag or name the same as the first time. If holding the wireless phone to your ear, you will hear what you have
said.
If a match is obtained, the voice set confirmation screen “Voice set” displays briefly and the Edit screen displays with the Voice
field ‘Set.’
If a match is not obtained from the two sample recordings, the fail screen displays the message, “Recordings didn’t match. Say
name again.”
Repeat the voice tag or name again. If a match is obtained, the confirmation screen displays “Voice set.”
If a match is not obtained from the three sample recordings, the fail screen briefly displays the message, “Voice not recorded.
Samples are too different.” Press Softkey 1 (OK) and the Voice tag menu returns.
Repeat the recording process or press CLR (Clear/Back) to return to the Edit screen.
Continue with “Allocate a LED Color” instructions or if finished adding/editing the fields, press Softkey 1 (OK) and return to the
screen where you started the add/edit process.
A voice tag may be allocated to only 10 entries in the phone memory and none in the SIM memory
Allocate LED Color
A color may be selected to flash on the LED when the phone entry number calls your wireless phone. The LED color may be allocated
by cycling through the LED field or at the LED screen.
To allocate a color in the LED field:
* Press (Up) or (Down) navigation key to highlight the LED field.
Press (Left) or (Right) navigation key to cycle the available colors.
Continue with “Allocate a Phonebook Picture” instructions or if finished adding/editing the fields, press Softkey 1 (OK) and
return to the screen where you started the add/edit process.
To allocate a LED color from the LED screen.
*
Press (Up) or (Down) navigation key to highlight the LED field and press (Select) to display the color list on the
LED screen.
Input a number 1 to 7 that corresponds to the preferred color or press (Up) or (Down) navigation key to highlight the
preferred color and press (Select/Save) to select the LED color and display the Edit screen with the color stated in the LED
field.
Continue with “Allocate a Phonebook Picture” instructions or if finished adding/editing the fields, press Softkey 1 (OK) and
return to the screen where you started the add/edit process.
98