Filter
Top Products
TTY Settings
*
Press Softkey 1 (Main),1,6,and 2 to display the TTY settings screen. (See Flags.)
Press (Up) or (Down) navigation key to highlight the desired TTY mode On or Off and press (Select) to select the
highlighted option or input the number that corresponds to TTY mode On/Off and return to the Other settings menu.
The TTY device cable is attached to the wireless phone’s hands-free accessory port (located on the same side of the phone as the IR
port).
Internet Settings
The Other settings menu provides the settings for the factory connection settings, user connection settings, timeout, and certificates to
access the Internet.
When you receive the 515 wireless phone, some of the Internet settings may be preset by AT&T Wireless. Contact your AT&T Wireless
provider for assistance to add or change Internet settings.
Factory Settings Connection
*
Press Softkey 1 (Main),1,6,3,1,and 1 to display the Factory setting screen.
Press (Up) or (Down) navigation key to scroll the factory settings.
Press Softkey 1 (OK) or (Select) exit and return to the Connections menu.
User Settings Connection
*
Press Softkey 1 (Main),1,6,3,1,and 2 to display the User Setting screen.
Press (Up) or (Down) navigation key to highlight and press (Select) to display the entry screen or input the
corresponding number of the desired list item to display the entry screen.
1 APN Enter the Access Point Name that defines the network by name stored on GGSN.
2 Proxy server Enter the proxy server that is between the client application, such as a web browser, and the real server.
3 Portal URL Enter the web site/service address that offers an array of resources and services, such as Email, forums,
search engines, and on-line shopping malls.
4 User name Enter your user id to enable login to the Internet.
5 Password Enter your password to enable login to the Internet.
6 HTTP port Enter the HTTP (HyperText Transfer Protocol) proxy port number.
7 HTTPS Port Enter the secure HTTP (HyperText Transfer Protocol Security)
proxy
port number.
8 DNS Enter the Domain Name Service address. (DNS is an software
application that translates domain names into IP addresses.)
Input the data for the field and press (Select/Save) to return to the User Setting
screen.
When all entries are completed, press CLR (Clear/Back) to return to the Connections
screen. Press (End) to return to Idle screen.
O
The TTY default is Off mode.
O
TTY is an abbreviation for
teletypewriter and text
telephony--equipment that employs
interactive text based
communications through the
telephone network.
O
Factory settings are established by
the network service provider.
47