Filter
Top Products
Accepting a Call
*
Press (Send) or Softkey 1 (Accept) to connect an incoming call.
To use quick silent or any key to accept a call, refer to Answer Options on page 30. However, if you already have a call in progress,
pressing the any key function does not apply. With a call in progress, you must press (Send) or Softkey 1 (Accept) to answer an
incoming call. (See Flag.)
Rejecting a Call
*
Press (End/On-Off) or Softkey 2 (Reject) to reject or ignore the call. The call goes automatically to voicemail depending if
voicemail is available by your service provider. (See Flag.)
Receiving a Call While in an Application
If you receive a call while creating a new message, you can accept or reject the call. When you accept the call, the message closes so
you may answer the call. The text entry for the message is saved and the message is saved in the Message center Drafts folder.
If you receive a call while you are in a PIM application (Personal Information Manager, for example typing a phone contact, calendar
entry, or a To Do task), you can accept or reject the call. When you accept the call, the application closes so that you may answer the
call. If you accept a call during text entry or editing changes, the text entry and changes are not saved.
If you receive a call while you are using the web browser, you can accept or reject the call. When you accept and end the call, the web
browser screen returns. You are still connected to the last website accessed.
Using Features/Application During a Call
There are a number of features and applications that you may use during a call. The ones that you cannot use during a call are listed in
the following table:
Phone Settings Screen Settings Call Settings Security Settings
Network Settings Other Settings Reset Settings Language Setting
Display Call Timer Display Call Charge IR Send IR Receive
Voice Mail Send Email Clock Web Browser
My Downloads Send MMS Play Voice Memo Synchronization
Unsuccessful Calls/Auto Redial
With Auto redial set On, your phone will try up to 10 times to redial a number if the first attempt is not successful. If the call cannot be
connected, a tone is heard, the display shows an appropriate message, and the phone returns to Idle. The number is automatically
called again after a short delay. The phone will try up to 10 times to redial the number. The failure to connect a call can be due to
network problems or if the other phone is busy.
*
Press Softkey 2 (Cancel) to end a redial attempt.
O
If you already have 2 calls in
progress (whether active, on hold,
or mutli-party), a third incoming call
can not be accepted because the
Softkey 1 (Accept) will not be
displayed on the incoming call
screen.
O
Do not press (End/On-Off) to
reject an incoming call if you
already have 2 calls in progress.
Pressing (End/On-Off) with 2
calls in progress does not reject an
incoming call but will disconnect a
call in progress.
Accept
Reject
21