NEC 515 Cell Phone User Manual


 
Language
If you wish to change the display language:
*
Press Softkey 1 (Main),1,2,and 5 to display the Language screen.
Press the appropriate key to select the desired language (see screen right) and return to the Screen settings menu.
Press (End) to return to the Idle screen.
Auto-hyphenation
With the hyphenation set to On, the displayed Phone numbers are hyphenated automatically based on the North American Numbering
Plan. With hyphenation set to Off, the displayed Phone numbers are not hyphenated. (See Flag.)
*
Press Softkey 1 (Main),1,2,and 6 to display the Auto hyphenate screen.
Press (Up) or (Down) navigation key to highlight the desired hyphenation option and press (Select) to select the
highlighted option or enter 1 to turn On hyphenation or 2 to turn Off hyphenation. Display returns to the Screen settings menu.
Display Call Timer
To set the call timer to display the time duration of calls, incremented in minutes and seconds, proceed as follows:
*
Press Softkey 1 (Main),1,2,and 7 to display the Display call timer screen.
Input 1 to set the call timer On to display call time duration or 2 to set the call timer to Off (call time duration does not display
on the screen). The setting is saved and the display returns to the Screen settings menu.
Display Call Charge
This option is disabled. It is not supported by the network service providers in the United States.
O
Example of hyphenation set On :
214-202-0202;
Example of hyphenation set Off :
2142020202.
36
Language
M125