Filter
Top Products
Using the Toolbox -116-
Useful Tips
• When the alarm and vibrate go off, press the SK1 (Turn off) to stop the alarm.
• When the alarm goes off and you have set snooze, do any of the following:
- To stop the alarm clock and cancel snooze, press the SK2 (Off).
- To snooze, press the SK1 (Snooze). After five minutes, the alarm clock goes off again.
- To let the alarm continue, do nothing. After three minutes, the snooze screen is displayed. To stop the alarm at this
point, press the SK2 (Cancel). If you do not press any more keys, the alarm clock goes off again after five minutes.
The alarm clock goes off up to ten times in all, unless you stop snooze or the alarm clock.
To Do this
1 Set time Set the time using the 24 hour display and press the Enter key.
2 Set repeat setting Select one of the following cycles and press the Enter key: Do not
repeat or Weekly.
Do not repeat indicates that the alarm will only be activated once.
Weekly is used to set days of week. Select one or more days using the
Enter key.
Disabling Weekly Alarm disables the next immediate occurrence
of this weekly alarm only. See To Change alarm clock status on
page 117.
3 Enter pop-up contents Enter contents (up to 32 single-byte characters) to be displayed in the
pop-up window on the set time screen and press the Enter key.
4 Set clock alarm tone Select the tone you want and press the Enter key. You can hear the
tone by selecting its name and pressing the SK1 (Play).
5 Set clock alarm vibration and snooze Check/uncheck the Vibration and Snooze checkboxes using the Enter
key.
When the alarm goes off, and snooze is set, sound and vibration occur
at five minute intervals. This happens up to three times unless you turn
off either snooze or the alarm clock.
6 Fix the settings in the alarm entry Press the SK1 (OK).
The alarm is set to on.
Make sure that you set alarm to on. To change it, press the SK2
(On/Off/Disable). Refer to To Change alarm clock status on
page 117.