Filter
Top Products
-63- Changing the Settings on your 338
Advanced settings Quality alarm: Turns the quality alarm on/off. This notifies you that your call may be
disconnected if you move into an area where there is a weak signal. Select No alarm, Loud
alarm and Soft alarm.
Dial pause setting: Edits a string of keypad characters (up to 128 single-byte characters) for
pause dialling. This function enables sending out of numbers while calling with pauses
inserted.
For example, after entering a number with the touch tone service, you can send out the
numbers you entered beforehand.
Pause dial entry function is useful for sending messages to a pager, etc. You can only use
keypad characters (0-9, # and ) and pause (press and hold the # key: displayed as p). A
pause at the beginning cannot be registered. A pause at the end is deleted when registered.
Registered pause dial entry can only be used while calling. Sent out pause dial entries are not
saved in the Outgoing calls list.
Portrait display: Displays the Caller Identification (CLI) picture in the contact list when making
and receiving calls.
Ignore if no ID: Turns no caller ID rejection function on/off. Rejects any calls received without
caller ID notification.
Voicemail: Sets voicemail clearance type by checking the check boxes.
Videomail: Sets videomail clearance type by checking the check boxes.
Send tones: Turns the send tone on/off.
Fast dial: Turn the Fast dial and Speed dial functions on/off.
Item Description