Samsung Cell Phone Cell Phone User Manual


 
7
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. The
Travel Adapter, which is used to charge the battery, is included
with your phone. Use only Samsung-approved batteries and
chargers. Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce the battery’s
talk and standby times.
Although you can use the phone while the battery is charging,
doing so requires additional charging time.
Note:
You must fully charge the battery before using your phone for the first
time. A discharged battery recharges fully in approximately 4 hours.
Using the Travel Adapter
1. With the battery installed, locate the Power/Accessory
Interface connector at the bottom of the phone.
Important!:
Verify that the handset battery is installed prior to connection. If
the battery is not properly installed and the wall charger is
connected, the handset may power off and on continuously,
preventing proper operation.
2. Plug the flat end of the Travel Adapter into the phone’s
interface connector jack and the other end into a standard
AC wall outlet.
Note:
When you connect the Travel Adapter, your phone powers on
automatically. Your Windows phone stays powered on whenever it is
charging.
Warning!:
While the device is charging, if the touch screen does not function
due to an unstable power supply, unplug the USB power adapter
from the power outlet or unplug the USB cable from the device.
3. When charging is finished, remove the flat end from the
interface connector jack on the phone.