Samsung DM-S105 Cell Phone User Manual


  Open as PDF
of 99
 
60
BACK to TOC
seCtIon 10 TOOLBOX: MY PROFILE, CAMERA, VOICE RECORDER
Change View Mode
The ChangeViewMode option lets you change your camera viewfinder
image from a portrait, full-screen view of the subject to a landscape, wide-
screen view without rotating your phone.
1. In the camera Options menu, select ChangeViewMode and press
. The View Mode menu pops up in the display.
2. Select WideScreen or FullScreen and press . You are returned
to the camera viewfinder screen, which shows the selected View
Mode image.
Color Tones
ColorTones lets you temporarily apply one of the following color-based
special effects to one or more pictures:
• Auto — No special effect.
• Negative — Reverses light and dark shades of gray.
• Sepia — Replaces all colors with shades of sepia.
• Emboss— Creates a three-dimensional effect in the
monochrome picture.
• Aqua — Replaces all colors with shades of aqua.
• Gray — Replaces all colors with shades of gray.
• Sketch — Reduces the picture to outlines.
note: THE auto COLOR TONE LEAVES THE PICTURE UNCHANGED.
1. In the camera Options menu, select ColorTones and press . The
name of the current color tone appears in the top line of the display.
2. Use the Left/Right NAV KEY to show the various color tones and the
effects they have on a picture.
3. When you decide on the color tone you wish to use, press Select
( ) or . The camera screen appears in the display with your
selected color tone applied.
The next time you press the Camera key ( ) or , the camera
applies the selected color tone to your pix.
Self Timer
SelfTimer lets you delay the exposure long enough so you or the person
taking the pix can join others in the pix.
1. In the camera Options menu, select SelfTimer and press . The
following options appear in the display:
• O
• 5Seconds
• 10Seconds
2. Select the desired delay, and then press . The Self Timer icon ( )
appears in the display.
The next time you press the Camera key ( ) or , a countdown
timer appears in the display that indicates the time remaining before
the camera takes the pix.
Pix Controls
PixControls settings remain in effect until you change them.
1. In camera mode, (before taking a pix) press Options ( ), select Pix
Controls and press .
2. Select one of the following options and press :
• Brightness
• WhiteBalance
• NightShot
 previous next