131
Using the Camcorder
Shooting Video
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your
subject with sufficient light by having the light source behind you.
1. In Idle mode, press the Options soft key to open the My Menu screen.
2. From the on screen list choose Camera and press the key.
3. Press the key twice to switch to the camcorder. You may also go to
the Menu soft key, which activates the icons across the top of the display,
and use the navigation keys to select the icon, and then the
Camcorder option from the dropdown list.
4. Adjust the image by aiming the camcorder at the subject.
5. Press the key to begin shooting video.
6. Press the Stop soft key to stop the recording and save the video file to your
My Stuff folder.
- OR -
Before shooting, press the Menu soft key to access camcorder options and
select Video Share. Video Share allows you to make a Video Share call by
displaying a screen where you can input the number of a recipient that also
has Video Share. You can select from your Contact list or enter the number
directly. Press the key to initiate the call. (This option will only display if
you have the Video Share service.) If the recipient accepts the Video Share
call, you continue using the camcorder as usual. Press the Stop soft key to
end the Video Share session. You will get a message “Video Sharing has
been Stopped. Save the Recorded Video?” You can select either Yes soft
key or No soft key to save the file. You can then continue the call or
terminate it.
7. Once the file has been saved, press the key to play back your video for
review.
8. Press the key to return to the viewer.
9. You can use the keypad to quickly change the camcorder options using the
shortcut keys.