Filter
Top Products
Bluetooth
Section 2K. Bluetooth 121
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish
trusted connections between your phone and another
Bluetooth device. When devices are paired, a passkey
is shared between devices, allowing for fast, secure
connections while bypassing the discovery and
authentication process.
To pair your phone with a Bluetooth device:
1. While in standby mode, select Main Menu > Tools >
Bluetooth.
2. Press Add New (left softkey) > Search. (Your phone
will display a list of discovered in-range Bluetooth
devices.)
3. Select the device you wish to pair with and press
Add to list (left softkey).
4. Enter the numeric passkey and press . You are
then notified that Pairing is in progress.
5. Enter a new Device Name for the device and press
Done (left softkey) to save and exit.
6. Highlight the device and press Connect (left
softkey). (
Connection Successful is displayed if the
device is communicating properly.)
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN)
profile to pair with a computer or PDA, you will need to
allow the other device to initiate pairing with your
phone.
1. While in standby mode, select Main Menu > Tools >
Bluetooth.
2. Press Add New (left softkey) > Wait for request.
3. The visibility pop-up screen is displayed.
4. Follow the onscreen prompts to enter your passkey
and press .
M520_Sprint.book Page 121 Thursday, September 18, 2008 12:34 PM