HTC LIBR160 Cell Phone User Manual


 
22 Getting Started
1.2 Starting Up
Insert the SIM/USIM Card
Your SIM (Subscriber Identity Module) or USIM (Universal Subscriber Identity Module)
card is given to you by your wireless service provider and contains your basic
subscriber information, such as your phone number and your address book.
Before you begin, make sure the phone is turned off.
1. Hold the phone in one hand with the front panel facing down in the
palm of your hand, and then press the battery cover downward to
slide it open.
2. Insert the SIM/USIM card into the slot
with the gold contacts facing down.
Push the SIM/USIM card all the way in
until the card locks into place.
To take the SIM/USIM card out, press
and hold the slot latch then push the
SIM/USIM card out from the bottom of
the card.
3. Replace the battery cover.
Insert the Battery
1. Slide the battery cover downward to remove it.
2. Align the exposed metal contacts
on the edge of the battery with the
prongs in the body of the phone.
3. Push the bottom of the battery into
place and then replace the battery
cover.
2
1