Filter
Top Products
Getting Your Device Connected and Synchronized
95 Copyright ©2006 Nokia All right reserved
8. Getting Your Device Connected and Synchronized
Connecting the Device to Other
Devices
You can connect your device to other compatible devices using
the following connections:
• Infrared connection
• Bluetooth connection
• USB connection
After a connection is established (except USB connection), you
can use the Send as commands in various application programs
to send data to or receive data from the connected devices.
Infrared Connection
Warning: Do not point the IR (infrared) beam at anyone's
eye or allow it to interfere with other IR devices. This device
is a Class 1 laser product.
1. Enable the infrared function of the device you want to
connect to. For more information, refer to the
documentation of that device.
2. Tap the icon in the Main screen and then select Infrared
on the tab.
3. Select the Infrared status as PC connection or Modem.
4. Set the Infrared function to be On or On for 10 minutes.
5. Tap Done.
6. Align the infrared port of your device with that on the device
to be connected. Make sure that the distance in between
does not exceed 1 meter (1 m) and there is no obstacles to
obstruct transmission.
7. Now you can use the Send as command of the application
program to send data, or receive data sent from the
connected device. When data is received, you will be
prompted to select View to view the received data, or Done
to save data to the specific location of the application
program.
USB Connection
1. Refer to the user guide on the CD to install and configure the
PC Suite for the Nokia 6708.
2. Make sure that your device is powered on and the
connection mode has been set to PC Connect (See "USB
cable" on page 47).
3. Connect the USB connector on the device to a USB port on
the PC using the supplied data cable.