Filter
Top Products
Using the Phone Functions
Copyright ©2006 Nokia All right reserved 20
3. The content of the selected call log item will appear. Tap the
button, or press the key to initiate the call.
Making a Call Using Speed Dial
1. Press the (or ) key, and then tap the
tab to switch to the Speed Dial screen.
2. Tap a speed dial icon on the screen, or press and hold a
numeric key on the keypad representing the number (name)
you want to call. The call will be initiated automatically.
Note: Refer to "Adding Speed Dial" on page 25 for how
to set up speed dial.
Tip! You can repeat making the last dialed call by
following the steps below:
1. Press the (or ) key, and then tap the
tab to go to the Phone screen, or the tab to go to the
Speed Dial screen.
2. Press the key twice.
Tip! You can also call the first 100 numbers in your SIM
card phone book by pressing numeric key(s) followed by the
and keys on your device. For example, to
call contact number 77 in your SIM card phone book, press
, , , .
Making a Call Using Voice Commander
1. Press and hold the function side key for about 3 seconds. The
Voice Commander will appear on the screen prompting you
to say the command.
2. Speak the name for the contact you want to call.
3. Your device will identify the name and initiate the call.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialing in all circumstances.
Answering a Call
When you have an incoming call, caller’s name (if available,
depending on the setting of the caller’s phone and the network),
picture (if enabled) and the following options will appear on the
screen.