Filter
Top Products
Using the Application Programs
63 Copyright ©2006 Nokia All right reserved
Camera Options When Taking Pictures and
Capturing Video
Press the key to enter the option menu and setup
images or video settings.
Image Settings
When taking pictures, you can choose to set different camera
settings for better effect. Tap the
button to set your desired
camera settings and tap an item in the pop-up options menu to
configure its corresponding settings.
• Image size: Tap to select a suitable image size. Larger image
size and higher image quality will result in larger picture
files.
Note: If Burst Mode is enabled, the 1280 x 1024 pixels
(SXGA) image size will become unavailable.
• Night Mode: Tap to set the night mode on or off.
• Effect: Tap to select different image effect such as Normal,
Mono, Sepia, Blush and Negative.
• Burst-Mode: Tap to set the Burst-mode on or off. If you set
the burst-mode on, there are three burst-mode for you to
choose: 6 Multishot, 9 Multishot and 16 Multishot.
Note: When the camera is set to be Burst-mode, to take
a multishot, press and hold the Camera key.
• If the image size is set to 1280 x 1024 pixels (SXGA), the
Burst-Mode option will be disabled automatically.
• Self-Timer: When taking pictures, you can enable the
10-second self-timer by setting Self timer on.
• Anti-Shaking: Your device supports anti-shaking function
when taking pictures. Tap this item to set this function on or
off.
Note: If the Anti-Shaking function is set to On, it will
take more time than normal for the device to capture
images.
• Settings: Tap to adjust different settings, such as Quality,
White Balance, Exposure Area, Exposure Bracketing, and
Anti-Flicker.
Note: If Exposure Bracketing is set to On, the device
will take 3 pictures in a row when you press the Camera key,
and then display the pictures taken for you to select. Tap to
select a picture and then tap the button.
• When the Exposure Bracketing function is set to On, it will
take more time than normal for the device to capture
images.
• It is recommended that you set the Anti-Flicker function to
On when taking pictures with black lines under fluorescent
lights.
• The Burst-Mode, Anti-Shaking and Anti-Flickering functions
cannot be enabled simultaneously.