Filter
Top Products
Using the Application Programs
59 Copyright ©2006 Nokia All right reserved
Divert calls
1. After Divert call is selected, the device will inquire the status
of your Divert call setting. This will take a few seconds.
2. According to the call type you want to setup, tap the Voice
or Data & Fax tab.
3. Tap to select a divert condition (for example, When busy
divert to:) and then select from the following options:
• Voice Mail (available only when a voice mail-box is created):
the calls will be diverted to your voice mail-box.
• Lookup in contacts: Pick a number from your contacts.
• Enter number: Enter the number directly.
• Off: Cancel diverting calls.
4. Tap the Done button to exit.
Note: For the availability and more information about
the divert call function, please consult your network service
provider.
Handsfree
With this function you can setup the way your device works with
the handsfree kit. Tap to select an option:
Options for Answering Mode
• Normal: Answer the call as normal.
• Any key: The incoming call will be answered automatically
after any key is pressed.
• After 5 seconds: The incoming call will be answered
automatically after 5 seconds.
Tip! You can press and hold the button on the controller
of the handsfree to answer and end calls.
Options for Bluetooth: Preferred sound device
• Phone: Use the keys on the device to manage calls.
• Headset: Use the keys on the device or the headset to
manage calls. If a Bluetooth headset is used, please choose
Headset as the preferred device.
• Handsfree: Use the keys on the device or the handsfree
(Bluetooth car kit) to manage calls. If a Bluetooth car kit is
used, please choose Handsfree as the preferred device.
Incoming Call Picture
If the incoming caller has a picture stored in the Contact
application program, the picture will appear on the screen when
his/her call is received.
Tap to check or uncheck the Show pop-up picture for incoming
calls check box. If checked, the picture will be shown.
Restrict Calls
You can request your network service provider to block the
dialing or receiving of certain calls. The call barring services
require the support of your network. To activate or cancel any of
the options, you must enter the network password provided by
the network service provider.