Filter
Top Products
You may not be able to change these codes for all security
modules.
The key store contains the contents of the security module.
To delete the key store, select Key store, select the desired
key store, and Options > Delete. You may not be able to
delete the key store of all security modules.
Back up data
It is recommended to back up device memory regularly to
the memory card or a compatible computer.
To back up information from the device memory to a
memory card, select Menu > Tools > Memory >
Options > Back up phone memory.
To restore information from the memory card to the
device memory, select Menu > Tools > Memory >
Options > Restore from card.
You can also connect your device to a compatible
computer and use Nokia PC Suite to back up data.
Remote configuration
Select Menu > Tools > Device mgr..
With Device manager, you can manage settings, data, and
software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To create a new server profile, select Options > New
server profile.
You may receive these settings from your service provider
in a configuration message. If not, define the following:
• Server name — Enter a name for the configuration
server.
• Server ID — Enter the unique ID to identify the
configuration server.
• Server password — Enter a password to identify your
device to the server.
• Session mode — Select the preferred connection type.
• Access point — Select the access point to use for the
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection.
• Host address — Enter the web address of the
configuration server.
• Port — Enter the port number of the server.
• User name — Enter your user ID for the configuration
server.
• Password — Enter your password for the
configuration server.
• Allow configuration — Select Yes to allow the server
to initiate a configuration session.
• Auto-accept all requests — Select Yes if you do not
want the server to ask for your confirmation when it
initiates a configuration session.
101